AudioCodes MediaPack MP-112, Руководство пользователя

Страница: 471 / 622

Version 6.6 471 MP-11x & MP-124
User's Manual 43. Configuration Parameters Reference
Parameter Description
Month Start
EMS: Start
[DayLightSavingTimeStart]
can be configured using any of the following formats:

Day of year - mm:dd:hh:mm , where:

mm denotes month

dd denotes date of the month

hh denotes hour

mm denotes minutes
For example, "05:01:08:00" denotes daylight saving starting from
May 1 at 8 A.M.

Day of month - mm:day/wk:hh:mm , where:

mm denotes month (e.g., 04)

day denotes day of week (e.g., FRI)

wk denotes week of the month (e.g., 03)

hh denotes hour (e.g., 23)

mm denotes minutes (e.g., 10)
For example, "04:FRI/03:23:00" denotes Friday, the third week of
April, at 11 P.M. The week field can be 1-5, where 5 denotes the
last occurrence of the specified day in the specified month. For
example, "04:FRI/05:23:00" denotes the last Friday of April, at 11
P.M.
Web: End Time or Day of
Month End
EMS: End
[DayLightSavingTimeEnd]
Defines the date and time when daylight saving ends. For a
description of the format of this value, see the
DayLightSavingTimeStart parameter.
Web/EMS: Offset
[DayLightSavingTimeOffset]
Defines the daylight saving time offset (in minutes).
The valid range is 0 to 120. The default is 60.
43.2 Management Parameters
This subsection describes the device's Web and Telnet parameters.
43.2.1 General Parameters
The general management parameters are described in the table below.
Table 43-10: General Management Parameters
Parameter Description
Web: Web and Telnet
Access List Table
EMS: Web Access
Addresses
[WebAccessList_x]
This table configures up to ten IP addresses that are permitted to access
the device's Web interface and Telnet interfaces. Access from an
undefined IP address is denied. When no IP addresses are defined in
this table, this security feature is inactive (i.e., the device can be
accessed from any IP address).
The default value is 0.0.0.0 (i.e., the device can be accessed from any IP
address).
For example:
WebAccessList_0 = 10.13.2.66
WebAccessList_1 = 10.13.77.7
For a description of this parameter, see 'Configuring Web and Telnet
Access List' on page
68 .