Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
1.1.2
Door Handle Assembly Overview
1 - Door handle
❑ Before removing, re‐
move lock cylinder with
cover on driver's door or
housing
❑ To remove, slide door
handle back and disen‐
gage from operating lev‐
er on mounting bracket.
❑ Pull door handle out
sideways at back end.
❑ Pull door handle back
diagonally out of mount‐
ing bracket or door.
2 - Bracket
3 - Actuating link
❑ Door lock removed.
❑ Engage actuating link in
door lock operating lev‐
er -arrow-.
Caution
♦
The release cable must
not be kinked under any
circumstances when in‐
stalling, otherwise mal‐
functions may result.
♦
Perform a function test
after installing.
❑ Slide actuating link side‐
ways into door lock,
then rotate 90° to lock.
4 - Door lock
❑ Removing
⇒ “1.1.3 Door Lock Assembly Overview“, page 78
5 - Hood catch
6 - Hood release lever
❑ Engage actuating link in operating lever on door handle as shown.
Slide door handle into mounting bracket
Audi TT 2007 ➤
Body Exterior - Edition 11.2010
76
Rep. Gr.57 - Front Doors, Central Locking System