Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
1 - Door plate
– Pull bellows down from
»A« pillar.
– Disconnect electrical
connectors on bottom of
»A« pillar.
– Loosen screw -4- on top
of door hinge.
– Remove bottom combi‐
nation screw -9- on bot‐
tom of door hinge.
– Remove cover cap from
hinge bolt.
Caution
Protect painted surfaces
on door and fender from
damage.
– Carefully lift door up and
out of hinges.
2 - Upper door hinge, upper
part
❑ No replacement part.
❑ Remains installed on
door side.
3 - Upper door hinge, lower
part
❑ No replacement part.
❑ Remains installed on
»A« pillar.
4 - Securing nut
❑ 25 Nm
5 - Cover
❑ Attach to nut.
6 - Securing spring
❑ Only installed on replacement part.
❑ Remove after installing new hinge.
7 - Bottom door hinge, upper part
– Remove any tension between upper and lower parts on bottom of door hinges if necessary with screw‐
driver, for example.
❑ No replacement part.
❑ Remains installed on door side.
8 - Bottom door hinge, lower part
❑ No replacement part.
❑ Remains installed on »A« pillar.
9 - Combination screw
❑ 32 Nm
Audi TT 2007 ➤
Body Exterior - Edition 11.2010
2. Removal and Installation
81
