Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
2.4.6
Rear Lid Lock Emergency Release Cable
1 - Emergency release handle
2 - Grommet
3 - Release cable
❑ To installing, engage
part on lid side with
clutch -8- in lid lock
❑ Clip coupling into inner
part of lid
❑ With lid opened, insert
handle side of release
cable through hinge into
luggage compartment
and engage grommet
-6- on hinge
❑ Clip cover -5- onto
hinge.
❑ Grip release cable in
luggage compartment
and guide through hole
in rear of roof frame
-10- and down.
❑ Engage release cable in
end plate -11- in center
of convertible top cover
❑ Engage release cable in
handle.
4 - Lid grommet
5 - Cover
❑ Slid onto lid hinge
6 - Hinge grommet
❑ Clipped into lid hinge
7 - Routing piece
8 - Coupling
9 - Rear lid latch
10 - Rear roof frame
11 - Convertible top compartment end plate
Country-Specific Emergency Release
Audi TT 2007 ➤
Body Exterior - Edition 11.2010
2. Removal and Installation
65