Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
– Remove idler pulley and continue cutting window free.
– Repeat procedure in upper and lower right part of window.
– Cut glass completely free in this manner.
– Remove window with double suction cups.
Damaged Rear Window, Removing
WARNING
When removing a window, always wear protective eyewear
and leather gloves.
– Protect body and interior from glass splinters.
– Remove glass pieces from adhesive material.
– Disconnect rear window defroster and window antenna con‐
nectors.
– Bond flange all around with fabric reinforced adhesive tape.
– Remove adhesive material (with glass residue) from window
opening using -V.A.G 1561A- and -V.A.G 1561/10- (with stop‐
per roll).
Preparations for Installing Rear Window
Note
♦
When reusing the undamaged window, cut rest of adhesive
material on window and flange with -V.A.G 1561 A- and -V.A.G
1561/8- so it is even, but do not remove completely.
♦
Residual material acts as a base for the new adhesive sealing
material.
Caution
♦ Keep adhesive surface free of dirt and grease.
♦ Only cut back adhesive surface shortly before installation.
♦ Do not prime or use a cleaning solution on the adhesive
surface.
Audi TT 2007 ➤
Body Exterior - Edition 11.2010
2. Removal and Installation
209
