Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
3.7
Underbody Trim Panels and Heat
Shields
⇒ “3.7.1 Noise Insulation“, page 248
⇒ “3.7.2 Bulkhead Heat Shield“, page 249
⇒ “3.7.3 Center Tunnel Heat Shield“, page 250
⇒ “3.7.4 Center Bearing Heat Shield“, page 251
⇒ “3.7.5 Center Muffler Heat Shield“, page 252
⇒ “3.7.6 End Muffler Heat Shield“, page 253
⇒ “3.7.7 Center Muffler Trim“, page 254
⇒ “3.7.8 Trim Angled Bracket“, page 254
3.7.1
Noise Insulation
1 - Bolt
❑ 6 Nm
2 - Bolt
❑ 2 Nm
3 - Noise Insulation
❑ Removing
– Remove the bolts -1-
and -2- and remove the
noise insulation toward
the rear under the
bumper.
❑ When installing, slide
the front noise insulation
in under the bumper.
4 - Threaded clip
❑ Slid sideways onto
bumper.
5 - Lock carrier
6 - Bumper
Audi TT 2007 ➤
Body Exterior - Edition 11.2010
248
Rep. Gr.66 - Exterior Equipment
