26
7.
TEST BUTTON:
This is a momentary contact switch. Press the green button to
turn on the high voltage output. Also illuminates to indicate a Pass condition.
8.
MEMORY:
(PROGRAM KEY)
Use this key to select one of the 50 memories to
modify or run stored test parameters.
9.
STEP:
(PROGRAM KEY) Use this key to select one of the 8 locations contained
within each memory.
10.
LOCK:
(PROGRAM KEY) Use this key to select key lockout mode. A password
may be used when setup in the calibration mode.
11.
LOCAL:
(PROGRAM KEY)
Use this key when you wish to go from the Remote
operation of the instrument to the Local mode.
12.
FUNCTION KEYS:
Use these keys to select the test function that will be performed
for the memory and step indicated. The four selections are:
AC-W:
AC Withstand Test
DC-W:
DC Withstand Test
INSULATION:
Insulation Resistance Test
G-BOND:
Ground Bond Test
13.
EXIT:
(PARAMETER KEY) Use this key to exit any menu or to clear an unwanted
entry in a parameter field.
14.
SETUP:
(PARAMETER KEY) Use this key to enter the setup menu and view or
change the GPIB address, display contrast, alarm volume, PLC remote settings, or the
stop on fail setting.
ASSOCIATED
RESEARCH, INC.
R
500VA DIELECTRIC ANALYZER
7700
1
10 11
13
12
14 15
16
17
18 19 20
21
2 3
4
5
6
7
8 9
Содержание 7700
Страница 2: ......
Страница 4: ......
Страница 8: ......
Страница 30: ...22 Ground Fault Interrupt GFI Trip Current 450 A max AC or DC HV Shut Down Speed 1 ms ...
