manualshive.com logo in svg

Associated Research 7700, Руководство по эксплуатации и обслуживанию

Поделиться
Скачать
Associated Research 7700 Скачать руководство пользователя страница 12

 

 

 

4 

1.4.

 

Safety 

 
This product and its related documentation must be reviewed for familiarization with safety 
markings and instructions before operation. 
 
This product is a Safety Class I instrument (provided with a protective earth terminal). 
Before applying power verify that the instrument is set to the correct line voltage (110 or 220) 
and the correct fuse is installed. 
 

A Hipot produces voltages and currents that can cause 

harmful or 

fatal electric shock. 

 To prevent accidental injury or death, these 

safety procedures must be strictly observed when handling and using 
the test instrument. 

 

1.4.1.

 

Service and Maintenance  

 

User Service 

To prevent electric shock do not remove the instrument cover.  There are no user serviceable 
parts inside.  Routine maintenance or cleaning of internal parts is not necessary.  Avoid the use 
of cleaning agents or chemicals on the instrument, some chemicals may damage plastic parts or 
lettering.  Any external cleaning should be done with a clean dry or slightly damp cloth.  
Schematics, when provided, are for reference only.  Any replacement cables and high voltage 
components should be acquired directly from Associated Research, Inc.  Refer servicing to an 
Associated Research, Inc. authorized service center.   
 

 

ASSOCIATED RESEARCH, INC. 

13860 WEST LAUREL DRIVE 

LAKE FOREST, IL 60045-4546 U.S.A. 

 

PHONE: 1 (847) 367-4077 

1 (800) 858-TEST (8378)

  

FAX: 1 (847) 367-4080 

E-MAIL : 

[email protected]

 

www.asresearch.com

 

 

Service Interval 

The instrument, its power cord, test leads, and accessories must be returned at least once a year 
to an Associated Research authorized service center for calibration and inspection of safety 
related components.  Associated Research will not be held liable for injuries suffered if the 
instrument is not properly maintained and safety checked annually. 
 

User Modifications 

Unauthorized user modifications will void your warranty.  Associated Research will not be 
responsible for any injuries sustained due to unauthorized equipment modifications or use of 
parts not specified by Associated Research.  Instruments returned to Associated Research with 
unsafe modifications will be returned to their original operating condition at the customers 
expense. 

Содержание 7700













































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды