APARIAN A-DNP3R, Руководство пользователя

Страница: 29 / 108

Setup
Document No. D109-010 Page 29 of 108
Revision 1.15
Figure 3.20. – Outstation Events Configuration
3.5. MESSAGE ROUTING
The module can be configured to route DNP3 data in one of three modes:

Reactive Tag (Outstation) mode

Schedule Tag (Master) mode

Unscheduled mode
3.5.1. R
EACTIVE
T
AG
(O
UTSTATION
) M
ODE
The Reactive Tag routing mode allows mapping of virtual Data Files to Logix tags across
multiple controllers. In this mode the DNP3 Router will redirect a DNP3 message to a Logix
controller at a preconfigured path.
Thus the routing of the DNP3 group, variation, and range to a Logix Controller tag is managed
by the DNP3 Router. In the Reactive Tag mode the DNP3 Router can operate completely
independently from the Logix controller by directly reading and writing to Logix tags.
NOTE : In Reactive Tag mode only Read, Write, Select, Operate, Direct-Operate,
Direct-Operate-No-Response, and Secure Authentication functions will be
supported.