APARIAN A-DNP3R Скачать руководство пользователя страница 83 | Manualshive

Страница: 83 / 108

background image

Diagnostics

Document No. D109-010

Page 83 of 108

Revision 1.15

Critical Messages Tx

The number of critical DNP3 packets sent by the module when security is
enabled.

Critical Messages Rx

The number of critical DNP3 packets received by the module when security
is enabled.

Messages Discarded

The number of DNP3 packets discarded by the module.

Error Messages Tx

The number of error DNP3 packets sent by the module.

Error Messages Rx

The number of error DNP3 packets received by the module.

Checksum errors

The number of corrupted DNP3 packets received by the module.

Timeouts

The number of message response timeouts the module has encountered.

Parity errors

The number of bytes with parity errors received by the module.

Assign Class Received

This is currently reserved.

Time Update Received

This number is the amount of times the DNP3 Master has sent a time
update command to the DNP3 Outstation.

Deadband Update Received

This is currently reserved.

Broadcast Message Received

This is the number of DNP3 Broadcast messages received.

Unsolicited Command Received This is the number of DNP3 Unsolicited (enable or disable) commands

received.

Table 7.3 – DNP3 statistics

Statistic

Description

Logix Data Type Mismatch - Read

The data type in Logix (atomic or UDT) did not match the DNP3 data
type during a read operation.

Logix Data Type Mismatch - Write

The data type in Logix (atomic or UDT) did not match the DNP3 data
type during a write operation.

Write Seq Index Out Of Order

DNP3  allows  the  user  to  write  data  in  a  non-sequential  manner  by
using DNP3 object prefixes. For example, a single write operation can
be targeted to array offset 2, 3, 4, and 8. This is not allowed in the DNP3
Router due to the nature of the CIP communication protocol.
The  user  will  need  to  write  array  offset  2,  3,  and  4  and  then  in  a
separate write function write to offset 8.

DNP3 Request Data Too Large

The request data is too big. The DNP3 Router allows for a maximum of
1000 bytes per transaction.

Mapped Item Not found

The DNP3 request has a range that is outside of the configured DNP3
mapping bounds for the specific group and variation.

Received Event Item Not Found

This is currently reserved.

DNP3 Request Too Many Objects

The DNP3 Router supports a maximum of 10 DNP3 objects in a single
DNP3 request. These statistics indicates that more than 10 DNP3
objects were found in a single request.

«
...
81
82
83
84
85
...
»

Содержание A-DNP3R













































































































Отзывы:

Нет отзывов

Похожие инструкции для A-DNP3R

Бренд: M2M Страницы: 9

Бренд: DBM Страницы: 50

Бренд: Ruckus Wireless Страницы: 56

Бренд: Tbus Страницы: 25

Бренд: Faderfox Страницы: 10

Speed Touch 591s

Бренд: Alcatel Страницы: 184

Бренд: Caton Страницы: 18

Бренд: Abocom Страницы: 63

LonWorks Communication Module LN-01

Бренд: Delta Electronics Страницы: 1

Бренд: Hunter Страницы: 2

Бренд: UNICORECOMM Страницы: 19

OmniStor 4900F Series

Бренд: Rackable Systems Страницы: 196

Бренд: Mobily Страницы: 12

TeraStation WSS WS5020N6

Бренд: Buffalo Страницы: 115

dLAN 200 AVsmart+

Бренд: Devolo Страницы: 2

Бренд: Inter-m Страницы: 20

Бренд: Belkin Страницы: 42

Бренд: Lanpro Страницы: 6

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды