APARIAN A-DNP3R Скачать руководство пользователя страница 27 | Manualshive

Страница: 27 / 108

background image

Setup

Document No. D109-010

Page 27 of 108

Revision 1.15

The Outstation Settings Attributes configuration consists of the following parameters:

Parameter

Description

Enable Master Filter

The DNP3 Router (in Outstation Mode) can have a DNP3 Master allowed list. This
can help reducing risks of unauthorized DNP3 Masters exchanging data with the
DNP3 Outstation.
It  also  allows  the  DNP3  Router  to  switch  between  DNP3  Masters  (if  a  DNP3
Master were to go offline) when sending Unsolicited Responses. Should the DNP3
Master  currently  being  used  for  unsolicited  responses  were  to  go  offline,  the
DNP3  Router  will  go  through  the  list  to  find  the  next  DNP3  Master  which  can
receive unsolicited responses.

NOTE

: The DNP3 Masters in the list are listed from highest

priority to lowest (where the highest priority DNP3 Master is at
the top). Should a DNP3 Master with a higher priority
reconnect, then the DNP3 Router will redirect its Unsolicited

responses to that DNP3 Master.

The following criteria can be used to allow a DNP3 Master:

IP Address

This is IP Address of the allowed DNP3 Master. (Note that this field is only
available with Ethernet communication e.g. TCP or UDP).

Node Address

The Node Address of the allowed master.

Location Name

This parameter is a name or code given where the device is installed by the user.

ID Code

This parameter is the code or number given to the device by the end user.

Device Name

This parameter is the name given to the device by the end user.

Product Name/Model

This parameter is the device manufacturer’s product name and model

Manufacturer’s Name

This parameter is the name of the device manufacturer.

Software Version

This attribute is the version code of the manufacturer’s device software.

Hardware Version

This attribute is the version code of the manufacturer’s device hardware.

Serial Number

This attribute is the serial number assigned by the device manufacturer.

Table 3.5 – Outstation Settings parameters

The Outstation Device Attributes can be setup to make the DNP3 Router look like any DNP3
Outstation. The Outstation Settings configuration is shown in the figure below. The DNP3
Outstation Settings configuration window is opened by either double clicking on the module
in the tree or right-clicking the module and selecting

Configuration

.

«
...
25
26
27
28
29
...
»

Содержание A-DNP3R













































































































Отзывы:

Нет отзывов

Похожие инструкции для A-DNP3R

UR5i v2 Libratum

Бренд: B+B SmartWorx Страницы: 8

Бренд: B+B SmartWorx Страницы: 8

Бренд: Garland Страницы: 4

Бренд: i-MO Страницы: 58

Бренд: REXROTH Страницы: 68

Бренд: Abocom Страницы: 2

Бренд: ProCurve Страницы: 2

Бренд: IDT Страницы: 207

HIRESCHMANN IT MAMMUTHUS MTM8003-FAN

Бренд: Belden Страницы: 84

ipRocketLink IAD 3086

Бренд: Patton electronics Страницы: 12

PD-9501-10GCO/AC

Бренд: Microchip Technology Страницы: 41

Бренд: M86 Security Страницы: 512

NetVanta 300 Series

Бренд: ADTRAN Страницы: 2

Бренд: Network Instruments Страницы: 44

Бренд: E-TOP Страницы: 90

Бренд: U-Media Страницы: 42

BIPAC-741 GE V2.0

Бренд: Billion Страницы: 108

Wireless ADSL2/2plus Modem Router 54Mbps

Бренд: Kraun Страницы: 57

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды