AMX NXD-700i, Руководство по эксплуатации/справочник

Страница: 56 / 152

Upgrading Modero Firmware
44 NXD-700i & NXT-CA7 7” Modero Touch Panels
5.
If the panel firmware being used is not current, download the latest Kit file by first logging in to
www.amx.com and then navigate to Tech Center > Firmware Files and from within the Modero section
of the web page locate your Modero panel.
6.
Click on the desired Kit file link and after you’ve accepted the Licensing Agreement, verify you have
downloaded the Modero Kit file to a known location.
7.
From within Studio, select Tools > Firmware Transfers > Send to NetLinx Device from the Main menu
to open the Send to NetLinx Device dialog (
B
in FIG. 43). Verify the panel’s System and Device number
values match those values listed within the System folder in the OnLine Tree tab of the Workspace
window (
A
in FIG. 43).
8.
Select the panel’s Kit file from the Files section.
9.
Enter the
Device
value associated with the panel and the
System
number associated with the Master
listed in the OnLine Tree tab of the Workspace window. The Port field is greyed-out.
10.
Click the
Reboot Device
checkbox. This causes the touch panel to reboot after the firmware update
process is complete. The reboot of the panel can take up 30 seconds after the firmware process has
finished.
11.
Click Send to begin the transfer. The file transfer progress is indicated on the bottom-right of the dialog
(
B
in FIG. 43).
12.
As the panel is rebooting, temporarily unplug the USB connector on the panel until the panel has
completely restarted.
13.
Once the first panel page has been displayed, reconnect the USB connector to the panel.
14.
Right-click the associated System number and select
Refresh System
. This causes a refresh of all project
systems, establishes a new connection to the Master, and populates the System list with devices on your
particular system.
15.
Confirm that the panel has been properly updated to the correct firmware version.
The panel firmware is shown on the right of the listed panel.
Download the latest firmware file from www.amx.com and then save the Kit file to
your computer.
FIG. 43 Using USB for a Virtual Master transfer
A
B