Setup Guide
TS601P-2 100 W Portable Solar Panel
What’s in the box?
Two units bundle of 100 W Solar Panel with Anderson connector
Important Safety Instructions
Solar Panel LED Indicator
Page 1
• Do not expose the solar panels to corrosive materials.
• Do not operate the solar panels in the rain, or near a fire source.
• During operation, place the solar panels at a location free from any overhanging branches or obstructions to prevent falling objects
from scratching the solar panel surfaces.
• If you are using the solar panels in windy conditions, always secure the panels to the ground using the stand nails to prevent the
solar panels from being blown away by the wind gusts.
• Alternatively, you may also tie the solar panels to wall surfaces or on the rooftop of your vehicle. Remember to untie and store the
solar panels before driving away in the vehicle.
• During storage, transportation, and operation, do not subject the solar panels to uneven forces as the solar panels cannot withstand
high bending forces.
Indicator Status
Information on the Output Ports
Off
No sunlight detected; solar panel not generating power.
Red blinking
Insufficient sunlight detected; solar panel not generating power.
Red
Sunlight detected; solar panel ready to generate power.
Red/Green blinking
Device connected; insufficient sunlight to charge device.
Green
Device connected; solar panel is charging device
USB Type-C port
LED
indicator
2 x USB Type-A ports
The LED indicator provides the following information:
Note: The solar panel LED indicator remains lighted in red color even when it is charging the PowerStation1500.
