AMX NXD-700i, Руководство по эксплуатации/справочник

Страница: 79 / 152

Setup Pages and Descriptions
67 NXD-700i & NXT-CA7 7” Modero Touch Panels
2.
Within the Tools menu, press the Panel Logs button. All connection data is contained in the section
Connection Logs .
Refreshing the Panel Connections Log
1.
From the Protected Setup page, press the Tools button. This opens the Tools menu.
2.
Within the Tools menu, press the Panel Logs button.
3.
Push the Refresh button.
Clearing the Panel Connections Log
1.
From the Protected Setup page, press the Tools button. This opens the Tools menu.
2.
Within the Tools menu, press the Panel Logs button.
3.
Push the Clear button and confirm your selection.
Panel Statistics Page
FIG. 65 Panel Connection Logs page
Panel Connection Logs Page
Back: Saves all changes and returns to the previous page.
Wired icon: The icon to the left of the Connection Status Icon displays that the current
connection to the Master is
Wired (image of three networked computers).
Connection Status icon: The icon in the upper-right corner of each Setup page shows online/offline state
of the panel to the master.
• Bright red - disconnected
• Bright green - connected. Blinks when a blink message is received to dark
green every 5 seconds for half a second then go back to bright green.
• Bright yellow - panel missed a blink message from the master. It will remain
yellow for 3 missed blink messages and then turn red. It will return to green
when a blink message is received.
Note : a Lock appears on the icon if the panel is connected to a secured NetLinx
Master.
Connection Logs: A history of all connections, attempts, and failures for the panel.
Clear: Clears the Connection Logs history.
Refresh: Refreshes the Connection Logs history.
Page: Indicates the current page of the Connection Logs.
Use the Up and Down arrows to move from one page to the next.