AMX NXD-700i, Руководство по эксплуатации/справочник

Страница: 15 / 152

Modero 7" Touch Panels
3 NXD-700i & NXT-CA7 7” Modero Touch Panels
NXD-700i Specifications (Cont.)
Supported Audio Sample
Rates 48000Hz, 44100Hz, 32000Hz, 24000Hz, 22050Hz, 16000Hz, 12000Hz,
11025Hz, and 8000Hz
Intercom Full duplex VoIP capabilities
Front Panel: • Light Sensor: Photosensitive light detector for automatic adjustment of
the panel brightness
• Motion Sensor (PIR): Passive Infrared Detector to wake the panel when
panel is approached
• Front Bezel Button: Provides both access to the setup and calibration
pages and toggles the panel between “sleep” or “wake” state. This
button is also user-programmable.
• Microphone: Frequency response of 300 to 3400Hz; used for intercom
applications.
• Speaker: Output of 4Ohm, 2 Watt, with a 300Hz low cutoff frequency
• Programmable Front Buttons and Leds used with the Touch Panel
Designer
Side Panel Connectors • Ethernet 10/100 Port: RJ-45 port for 10/100 Mbps communication.
• The Ethernet port automatically negotiates the connection speed
(10 Mbps or 100 Mbps), and whether to use half duplex or full duplex
mode.
• Power is supplied through Power Over Ethernet (PoE).
• NXD-700i panels communicate with the NetLinx Master using the ICSP
protocol over Ethernet.
• LEDs show communication activity, connections, speeds, and mode
information:
L/A- link /activity - Yellow LED lights On when Ethernet cables are
connected and terminated correctly and then blinks when receiving
Ethernet data packets.
SPD-speed - Green LED lights On when the connection is 100 Mbps and
turns off when the speed is 10 Mbps.
• Mini-USB Connector: 5-pin Mini-USB connector used for programming,
firmware update, and touch panel file transfer between the PC and the
target panel.
This connector is also used for providing audio output for external
speakers.
Operating /Storage
Environments: • Operating Temperature: 0° C (32° F) to 40° C (104° F)
• Operating Humidity: 20% - 85% RH
• Storage Temperature: -20° C (-4° F) to 60° C (140° F)
• Storage Humidity: 5% - 85% RH
Certifications: • FCC Part 15 Class B
• CE
• IEC60950
• RoHS
Included Accessories: • Installation Kit for NXD-700i panels (KA2258-02):
- 4 Phillips-head screws (#4-40 x 0.250 Black) (80-0112)
- 3 Drywall clips (62-5924-05)
- 3 #6 sheet metal screws (80-0192)
• Trim Ring with button openings (60-2258-26)
• Trim Ring without button openings (60-2258-25)
Other AMX Equipment: • NXA-RK7 Rack Mount Kit (FG2904-53)
• CB-TP7 Rough-In Box (FG035-10)
• PS-POE-AF PoE Injector (FG423-80)
• CC-USB Type-A to Mini-B5-wire programming cable (FG10-5965)
• USB to Headphone Adaptor (FG5966-23)
• AMX SIP Communications Gateway (FG2182-0x)