AMX Modero NXD-CA12, Руководство по эксплуатации/справочник

Страница: 36 / 168

Touch Panel Accessories
26 12” and 15” Modero Touch Panels
7.
While maintaining the 45° angle alignment on the new module, push it in firmly until the contact pins are
completely inside the connector.
8.
Push the card downward (to the main board) until the metallic braces snap around the Memory Module to
hold it in place.
Step 3: Replacing the NXT Outer Housing
Complete the procedures outlined within the Step 3: Replacing the NXT Outer Housing section on page 23.
Installation of the EXM memory module (WallMount Panel)
These procedures involves removing the outer housing, installing the new memory module, and then securely
replacing the outer housing back onto the NXD panel.
Step 1: Removing the existing NXD Outer Housing
Complete the procedures outlined within the Step 1: Removing the existing NXD Outer Housing section on
page 23.
Step 2: Installing the internal EXM memory module
Complete the procedures outlined within the Step 2: Installing the internal EXM memory module section on
page 25.
Step 3: Replacing the NXD Outer Housing
Complete the procedures outlined within the Step 3: Replacing the NXD Outer Housing section on page 25.
NXT-BP Power Pack (FG2255-10)
The NXT-BP Power Pack (FIG. 25) is a rechargeable Lithium-Ion "smart" battery used to provide power to the
NXT Modero panel through the NXA-BASE/B Battery Base. This battery incorporates an on-board battery
life indicator. The NXT-BP battery can be charged through either the base (when connected to the Modero
panel) or through an optional NXT-CHG Modero Power Station. Extra NXT-BP Power Packs can be
purchased separately as an optional accessory.
Product Specifications
Verify the new EXM Memory Module is correctly positioned using the alignment
groove located on the connector (as seen in FIG. 24 above).
FIG. 25 NXT-BP Power Pack
NXT-BP Specifications
Dimensions (HWD):
• 0.69" x 3.50" x 5.81" (1.75 cm x 8.89 cm x 14.76 cm)
Power (Voltage): • 11.1 Volts (nominal)
Weight: • Single NXT-BP Power Pack: 1.0 lbs (0.45 kg)
Features: • Battery Usage: 4 to 8 hours (time is usage dependant)
• Charge Capacity: 6300mAh
Operating / Storage
Environment: • Operating Temperature: 0° C (32° F) to 40° C (104° F)
• Operating Humidity: 20% - 85% RH
• Storage/Discharge Temperature: -20° C (-4° F) to 60° C (140° F)
• Storage Humidity: 5% - 85% RH