Ampac FireFinder PLUS, Установка, пусконаладка и эксплуатация

Страница: 51 / 128

Page 44
8.3 Day/Night
Press

The DAY-NIGHT SETTINGS screen will appear. Time entry is the same as setting the
“Time” facility. Note this Function is available at Access Level 3 only.
Press

To enter the DAY ON time.
Press

To enter the NIGHT ON time.
Press

To ENABLE / DISABLE
DAY-NIGHT SETTINGS – CURRENTLY DISABLED
DAY ON TIME 08:00 NIGHT ON TIME 18:00
0:DAY TIME 1:NIGHT TIME 2:ENABLE
SELECT NO
AC:3Z ALM:0 PALM:0 FLT:0 DIS:0
Figure 56: DAY-NIGHT SETTINGS Menu
For this Function to have control it must be ENABLED by press

Re-pressing

will toggle to
DISABLE .
8.4 Logs
Press

to access the EVENT LOG MENU will be displayed.
The
LOGS MENU allows the operator to select and view the events that have occurred.
EVENT LOG MENU (MAXIMUM SIZE = 2000)
0:ALARM 1:FAULT 2:DISABLE 3:SYSTEM
4:I/O 5. ERASE ALL LOGS 6. WDOG
SELECT NO
AC:3Z ALM:0 PALM:0 FLT:0 DIS:0
Figure 57: DAY-NIGHT SETTINGS Menu
Once the type of log is selected, e.g. FAULT, each entry can be viewed by stepping through them
using the buttons

Note: Pressing

and

require access level 3.
The type of log, number and totals logged, date and time of the ALARM, FAULT, DISABLE, SYSTEM
or I/O as well as device information will be displayed. The SYSTEM screen displays events and
watchdog activity. From these screens the operator can select two other facilities, they are;

PRINT ENTRY will print out the displayed information if a printer is installed, or

SHOW OPTIONS allows the operator to select how the Logs are viewed .

To VIEW BY ENTRY NUMBER ,

to VIEW BY DATE or

to PRINT MULTIPLE ENTRIES . In
each case the screen will ask for the appropriate information (ENTRY NUMBER or DATE) to be
entered before the selected option will be displayed.