Ametek Sorensen SG Series, Руководство по программированию

Страница: 31 / 149

SG Series Programming Ethernet Features, Functions and Specifications
M550129-03 Rev L
4-3

Soft limits for voltage and current

Overvoltage protection

Output enable/disable

Maskable fault interrupt

Hold and trigger

External relay control

Full calibration
4.2.3
Readback Functions

Measured voltage and current

Voltage and current settings

Soft voltage and current limits

Overvoltage protection setting

Status and Accumulated Status registers

Programming error codes

Fault codes

Manufacturer, power supply model, and firmware version identification
4.3
SPECIFICATIONS
(SUBJECT TO CHANGE WITHOUT NOTICE)
4.3.1
Ethernet/LAN Configuration

Ethernet Standard: IEEE-802.3 compliant

Technology: 10/100Base-T

Connection Monitoring: Media Sense supported

Protocol: TCP/IP, IPV4

ICMP (ping server): Enable (default)/Disable

IP Address Assignment: Automatic via DHCP (Primary default), Static,
or Automatic Private IP Addressing (Auto-IP, Secondary default)

VXI-11 Discovery: Supported

Security: Password protected access, and selective permissions for
each user
4.3.2
Ethernet Configuration Factory Defaults
PARAMETER DEFAULT
Host Name SGx<base model>-<last four digits of serial number>