Ametek Sorensen SG Series, Руководство по программированию

Страница: 58 / 149

Ethernet Configuration and Remote Programming SG Series Programming
5-24
M550129-03 Rev L
5.5.4
STATUS
The Status page displays updated information for the following parameters:
Figure 5-16. Status Page
Output : displays the power output status, ON or OFF
Trigger : set up by SCPI commands, displays whether the Trigger state is
OFF, ARMED, or TRIGGERED.
OVP : displays Read Only status of over voltage protection, either OK
(normal) or TRIPPED.
FAULT : displays Read Only status of over temperature condition, either
OK (normal) or TRIPPED.
Command Error : displays command and syntax errors that are queued
in the supply.
READ NEXT ERROR : each click brings the next error into the Command
Error display, until no other errors are in the queue.
CLEAR MESSAGES : click this button to clear the Command Error
message window of past messages.