Ametek Sorensen SG Series, Руководство по программированию

Страница: 119 / 149

SG Series Programming SCPI Command Operation
M550129-03 Rev L
6-53
volts in 0.1 sec)
PROG:DEF 17, RAMPTOV, 7.77, 7.98, 5, 20, 0.1
(ramp from 7.77 volts to 7.98
volts in 0.1 sec)
PROG:DEF 18, RAMPTOV, 7.98, 8.17, 5, 20, 0.1
(ramp from 7.98 volts to 8.17
volts in 0.1 sec)
PROG:DEF 19, RAMPTOV, 8.17, 8.31, 5, 20, 0.1
(ramp from 8.17 volts to 8.31
volts in 0.1 sec)
PROG:DEF 20, RAMPTOV, 8.31, 8.50, 5, 20, 0.1
(ramp from 8.31 volts to 8.50
volts in 0.1 sec)
PROG:DEF 21, GOTO, “Discharge”
(step 21 may only be a STOP,
RETURN, or GOTO)
PROG:DEF 22, STOP
PROG:STAT COMPLETE
PROG:SAVE:SEL
PROG:STAT?
Response:
Ram[66]=“STOPPED”,Slave[66]=”STOPPED”
The formula for discharging is
RC
t
Ae

, where A is the calculated amplitude achieved by the
previous charge cycle.
PROG:NAME “Discharge”
PROG:MALL DEFAULT
PROG:DEF 1, RAMPTOV, 8.50, 7.69, 5, 20, 0.1
//ramp from 8.50 volts down to
7.69 volts in 0.1 sec
PROG:DEF 2, RAMPTOV, 7.69, 6.95, 5, 20, 0.1
//ramp from 7.69 volts down to
6.95 volts in 0.1 sec
PROG:DEF 3, RAMPTOV, 6.95, 6.29, 5, 20, 0.1
//ramp from 6.95 volts down to
6.29 volts in 0.1 sec
PROG:DEF 4, RAMPTOV, 6.29, 5.70, 5, 20, 0.1
//ramp from 6.29 volts down to
5.70 volts in 0.1 sec
PROG:DEF 5, RAMPTOV, 5.70, 4.66, 5, 20, 0.1
//ramp from 5.70 volts down to
4.66 volts in 0.1 sec
PROG:DEF 6, RAMPTOV, 4.66, 4.22, 5, 20, 0.1
//ramp from 4.66 volts down to
4.22 volts in 0.1 sec
PROG:DEF 7, RAMPTOV, 4.22, 3.82, 5, 20, 0.1
//ramp from 4.22 volts down