Ametek Sorensen SG Series, Руководство по программированию

Страница: 116 / 149

SCPI Command Operation SG Series Programming
6-50 M550129-03 Rev L
EXAMPLE 4
Issue
*RST
to establish a known state.
In this example, create a sequence that pauses at its end to let the last settings remain in
effect. To do this use the
PAUSE
command.
Now create a new SEQ3:
PROG:SEL:NAME “SEQ3”
PROG:MALL DEFAULT
PROG:DEF 1, VIMODE, 3, 4, 11, 10
//go to 3 volts, 4 amps, 11 volts ovp, for
10 sec
PROG:DEF 2, RAMPTOV, 3, 5, 4, 11, 10
//ramp from 3 volts to 5 volts in 10 sec
PROG:DEF 3, VIMODE, 5, 4, 11, 10
//hold 5 volts for 10 sec
PROG:DEF 4, RAMPTOV, 5, 3, 4, 11, 10
//ramp from 5 volts to 3 volts in 10 sec
PROG:DEF 5, VIMODE, 3, 4, 11, 10
//hold 3 volts for 10 sec
PROG:DEF 6, SUBCALL, “SEQ2”
//call SEQ2 as a subsequence
PROG:DEF 7, VIMODE, 4, 5, 11, 6
//go to 4 volts, 5 amps, 11 volts ovp, for 6 sec
PROG:DEF 8, PAUSE
//allow the output to remain at the last setting
PROG:DEF 9, STOP
//stop running the sequence while the
unit remains at the state of the last
command within the sequence.
PROG:STAT COMPLETE
PROG:SAVE:SEL
PROG:STAT?
Response:
Ram[44]=“STOPPED”,Slave[44]=”STOPPED”