background image

1

EC Declaration of Conformity

We
GOOD WILL INSTRUMENT CO., LTD.

No. 7-1, Jhongsing Rd., Tucheng City, Taipei County 236, Taiwan.

GOOD WILL INSTRUMENT (SUZHOU) CO., LTD.

No. 69 Lushan Road, Suzhou New District Jiangsu, China.

declare that the below mentioned product

PEL-300

is herewith confirmed to comply with the requirements set out in the Council Directive on the
approximation of the Law of Member States relating to Electromagnetic Compatibility
(89/336/EEC

,

92/31/EEC

,

93/68/EEC

)

and Low Voltage 

Equipment 

Directive

  (

73/23/EEC,

93/68/EEC

).

For the evaluation regarding the

 

Electromagnetic Compatibility and Low Voltage 

Equipment

Directive, the following standards are applied:

EN 61326-1:

Electrical equipment for measurement, control and laboratory use––EMC requirements

(1997+A1:1998)

Conducted Emission

Electrostatic Discharge

IEC 1000-4-2

(1995)

Radiated Emission

EN 55022 class B (1994)

Radiated Immunity

IEC 1000-4-3

(1995)

Current Harmonics

EN 61000-3-2

(1995)

Electrical Fast Transients

IEC 1000-4-4

(1995)

Voltage Fluctuations

EN 61000-3-3

(1995)

Surge Immunity

IEC 1000-4-5

(1995)

------------------

----------

----------

Conducted Susceptibility

EN 61000-4-6

(1996)

------------------

----------

----------

Power Frequency Magnetic field

EN 61000-4-8

(1993)

------------------

----------

----------

Voltage Dip/Interruption

EN 61000-4-11

(1994)

Low Voltage Equipment Directive 73/23/EEC & amended by 93/68/EEC

IEC/EN 61010-1:2001

Содержание PEL-300










































Отзывы: