Ametek Sorensen Asterion DC ASM, Руководство по программированию

Страница: 94 / 162

Asterion DC Multioutput Series
Programming Manual
M330517-01 Rev C 10-77
Command Description SCPI
OUTPut<n>:PROTection:DELay <NRf>
Sets the programmable time delay executed by the
supply before reporting output protection conditions
after a new output voltage or current is specified.
Functional granularity of +/- 0.5 seconds
N
OUTPut<n>:PROTection:DELay?
Returns the time delay to be executed by the supply.
N
OUTPut<n>:PROTection:FOLD <0|1|2|3>
Sets the foldback (program down) mode of the
supply. Valid arguments are
0 (OFF or do nothing, do not program down to zero),
1 (program down to zero upon constant-voltage
mode or constant power mode), or
2 (program down to zero upon entering constant-
current mode or constant power mode), or
3 (program down to zero upon entering constant -
current mode or constant-voltage mode),
N
OUTPut<n>:PROTection:FOLD?
Returns the set foldback (program down) mode of
the supply.
0 = OFF; will not program down.
1 = will program down to zero upon entering
constant-voltage mode or constant
power
mode.
2 = will program down to zero upon entering
constant-current mode or constant power
mode.
3 = will program
down
to zero upon entering
constant - current mode or constant-voltage
mode.
N
OUTPut<n>:PROTection:CLE
Clears the LATCH condition, when Remote Inhibit is
set to Latched condition.
N
OUTPut<n>:SENSe <boolean>
Sets the output voltage sense signal setting. Valid
arguments are 1/REMOTE or 0/LOCAL. When
REMOTE option is selected, voltage sense signal
must be connected at RVS connector at the rear side
of power supply.
N
OUTPut<n>:SENSe?
Returns the setting of the output voltage sense
signal.
N
OUTPut<n>:SENSe:DEFault
<Boolean>
Sets the Power ON setting for output voltage sense
signal LOCAL or REMOTE. Valid arguments are
1/REMOTE or 0/LOCAL.
N
OUTPut<n>:SENSe:DEFault?
Returns the Power ON setting of the output voltage
sense signal.
N