Ametek Sorensen Asterion DC ASM, Руководство по программированию

Страница: 118 / 162

Asterion DC Multioutput Series
Programming Manual
M330517-01 Rev C 11-101
SYSTem:PROGDELAY:OUTPut:STATe? //
Returns the Output ON or Off delay feature’s
state.
Example 1: To turn ON the output of channel 1,2 and 3 in a sequence with configuration as
follows:
Reference channel = 1, Enabled channel = 1,2 and 3, Delay of channel 2 = 300 ms, Delay
of channel 3 = 1000 ms and output ON/OFF state = 1 (ON).
SYST:PROGDELAY:REF 1
//sets the reference channel as channel 1.
SYST:PROGDELAY:ENABLE 1 2 3
//enables all three channels.
SYST:PROGDELAY:OUTP:STAT 1
// Allows the selected channels to turn ON the
output in a sequence with programable delay.
SYST:PROGDELAY:DELAY 0,300,1000
// Since channel 1 is the reference channel.
Reference channel must be programmed to 0 ms,
sets channel 2 delay to 300 ms and sets channel 3
delay to 1000 ms.
OUTP1:STAT 1
//Since channel 1 is set as reference channel, it
should be turned ON to initiate the sequence of
Output ON/OFF Delay.
Example 2: To turn OFF the output of channel 1,2 and 3 in a sequence with configuration
as follows:
Reference channel = 3, Enabled channel = 2 and 3, Delay of channel 2 = 500 ms and
output ON/OFF state = 0 (OFF).
SYST:PROGDELAY:REF 3
//sets the reference channel as channel 3
SYST:PROGDELAY:ENABLE 2 3
//enables only channels 2 and 3.
SYST:PROGDELAY:OUTP:STAT 0
// Allows the selected channels to turn OFF the
output in a sequence with programable delay.
SYST:PROGDELAY:DELAY 0,500,0
// Since channel 3 is the reference channel.
Reference channel must be programmed to 0 ms,
sets channel 2 delay to 500 ms and the unselected
channel i.e., channel 1 must also be programmed to
0 ms.
OUTP1:STAT 0
//Since channel 3 is set as reference channel, it
should be turned OFF to initiate the sequence of
Output ON/OFF Delay.