Ametek Sorensen Asterion DC ASM, Руководство по программированию

Страница: 107 / 162

Asterion DC Multioutput Series
Programming Manual
10-90
M330517-01 Rev C
Command Description
SCPI
CALibrate<n>:MEASure:CURRent:OFFSet
<NRf>
Sets the value of the offset for
current measurements.
N
CALibrate<n>:MEASure:CURRent:OFFSet?
Returns the value of the offset for
current measurements.
N
CALibrate<n>:MEASure:VOLTage:CALCula
te
Calculates the value of the gain and
offset for voltage measurements.
N
CALibrate<n>:MEASure:VOLTage:GAIN
<NRf>
Sets the value of the gain for voltage
measurements.
N
CALibrate<n>:MEASure:VOLTage:GAIN?
Returns the value of the gain for
voltage measurements.
N
CALibrate<n>:MEASure:VOLTage:OFFSet
<NRf>
Sets the value of the offset for
voltage measurements.
N
CALibrate<n>:MEASure:VOLTage:OFFSet?
Returns the value of the offset for
the voltage measurements.
N
CALibrate<n>:MODel:LASTCALDATE<strin
g>
Sets the date last calibrated;
format: MM DD YYYY (space after
MM and DD required)
N
CALibrate<n>:MODel:LASTCALDATE?
Returns the date last calibrated. N
CALibrate<n>:MODel:NEXTCALDATE<strin
g>
Sets the date next calibration is
required;
format: MM DD YYYY (space after
MM and DD required)
N
CALibrate<n>:MODel:NEXTCALDATE?
Returns the date next calibration is
required.
N
CALibrate<n>:MODel:POWERON <string>
Sets the default output enable
condition at power on.
Input format:
ON = enables the output at next
power on.
OFF = disables the output at next
power on .
N
CALibrate<n>
:
MODel:POWERON?
Returns the status of the output
enable condition at power on
N
CALibrate<n>:MODel:RESET <string>
Sets the default output enable
condition when the *RST command
is issued.
Input format:
“ON,INIT” enables the default output
“OFF,INIT” disables the default
output
NOTE: Quotation marks are
required in the command string.
N
CALibrate<n>
:
MODel:RESET?
Returns the status of the default
output enable condition when the
*RST command is issued
N
CALibrate<n>:OUTPut:CURRent:CALCulat
e
Calculates the value of the gain and
offset for output current.
N
CALibrate<n>:OUTPut:CURRent:DAC
<NR1>
Sets the output of the output current
D/A converter.
N
CALibrate<n>:OUTPut:CURRent:FIVEPOIN
T <1|2|3|4|5> <NRf>
Sets output current value for each
calibration point (1-5)
N
CALibrate<n>:OUTPut:CURRent:FIVEPOIN
T?
Returns the entered values for 5-
point calibration.
N