Ametek Sorensen Asterion DC ASM, Руководство по программированию

Страница: 49 / 162

Asterion DC Multioutput Series
Programming Manual
6-32
M330517-01 Rev C
Host Name: the default host name is ASTDC.
You may change this name if it is unique (Host Name must be limited to 15 characters for
LXI compliance) so that VXI-11 Discovery and any other IP Discovery program can
identify your specific device on your network.
To change: Type the new name (15 characters maximum) in the blank field provided
and click Apply to update (or make all desired changes before clicking
Apply ).
Description : you may change the default factory setting to something more meaningful
to your current setup.
To change: Type your customized description, up to 36 characters, in the blank field
provided, and click Apply to update (or make all desired changes before
clicking Apply ).
TCP/IP Configuration: the power supply can operate in DHCP or Static IP Configuration.
You may statically assign an IP address as well as configure other Ethernet/LAN
parameters (Subnet Mask and Gateway) or use DHCP for automatic assignment of an IP
address.
Static IP Configuration: Click the radio button next to Static IP to manually configure
some or all the following Ethernet/LAN parameters:
IP Address
– input any standard IP address. (Factory setting is 192.168.0.200).
Click Apply and enter the new IP address in LXI web browser to view the Home
page of the power supply. Refer to Figure 6-12. If you have changed the network
portion of the IP address, it may be necessary to alter the network settings of your
attached computer to reconnect to the power supply.
Subnet Mask
– input a value that identifies which network segment your power
supply is on, consisting of 4 whole numbers, each ranging from 0 through 255,
separated by periods. (Factory setting is 255.0.0.0, a class-C network subnet
mask). Click
Apply to update (or make all desired changes before clicking Apply ).
Gateway
– input the IP Address of any gateway that stands between the
instrument and any other network entities that communicate with the power
supply. (No factory setting). Click
Apply to update (or make all desired changes
before clicking Apply ).
DHCP Configuration: Click the radio button next to DHCP, for dynamic address
acquisition from the DHCP server.
Auto IP: If it is enabled, when there is no DHCP server available, the power supply will
assign itself an IP address in the range from 169.254.0.1 to 169.254.255.254 with a
subnet mask of 255.255.0.0.
•
Click in the box next to Auto IP to check (enable Auto IP) and click again to uncheck
(disable Auto IP) (Refer to Figure 6-14)