Ametek Sorensen Asterion DC ASM, Руководство по программированию

Страница: 116 / 162

M330517-01 Rev C
11-99
11
OUTPUT ON/OFF DELAY
Introduction
This section describes the operation of the OUTPUT ON/OFF DELAY feature. This allows
user to configure the output to turn ON or to turn OFF the output in a sequence with
respect to one of the reference channels with a programmable delay time.
Applications under OUTPUT ON/OFF DELAY
Reference Channel:
Reference Channel allows the user to configure the supply to turn ON or to turn OFF
the output of programmed channel as Output ON/OFF delay starting sequence.
Reference Channel of the Output ON/OFF Delay can be set by sending the following
SCPI command using any of the interface available on the unit
(RS232,USB,LAN,GPIB):
SYSTem:PROGDELAY:REF <1|2|3>
Valid arguments are: 1 (sets channel 1 as reference channel for output on/off delay)
2 (sets channel 2 as reference channel for output on/off delay)
3 (sets channel 3 as reference channel for output on/off delay)
SYSTem:PROGDELAY:REF? // Returns the programed reference channel for output ON or
OFF delay
Enable Channel:
Enable channel allows the user to select the required channels that are to be turned
on or off in the output ON/OFF delay sequence.
To enable the channels of the Output ON/OFF Delay can be set by sending the
following SCPI command using any of the interface available on the unit
(RS232,USB,LAN,GPIB):
SYSTem:PROGDELAY:ENABLE <1> <2> <3>
A space should be passed between each argument.