Ametek Sorensen Asterion DC ASM, Руководство по программированию

Страница: 114 / 162

Asterion DC Multioutput Series
Programming Manual
M330517-01 Rev C 10-97
CAL3:INIT:CURR 5.0
// set power-on initial current of channel 3 to 5.0 A.
CAL3:INIT:CURR?
// confirm power-on initial current setting.
CAL3:INIT:VOLT 10.0
// set power-on initial voltage of channel 3 to 10.0 VDC.
CAL3:INIT:VOLT?
// confirm power-on initial voltage setting.
CAL3:INIT:VOLT:PROT 11.0
// set power-on initial overvoltage protection of channel 3 to 11.0
//VDC.
CAL3:INIT:VOLT:PROT?
// confirm power-on initial overvoltage protection setting.
// cycle power to the unit.
// note voltage is initialized to 2.0 VDC via front panel.
SOUR1:CURR?
// confirm power-on initial current setting of channel 1.
SOUR1:VOLT?
// confirm power-on initial voltage setting of channel 1.
SOUR1:VOLT:PROT?
// confirm power-on initial overvoltage protection setting of
//channel 1.
SOUR2:CURR?
// confirm power-on initial current setting of channel 2.
SOUR2:VOLT?
// confirm power-on initial voltage setting of channel 2.
SOUR2:VOLT:PROT?
// confirm power-on initial overvoltage protection setting of
//channel 2.
SOUR3:CURR?
// confirm power-on initial current setting of channel 3.
SOUR3:VOLT?
// confirm power-on initial voltage setting of channel 3.
SOUR3:VOLT:PROT?
// confirm power-on initial overvoltage protection setting of
//channel 3.