Ametek Sorensen Asterion DC ASM, Руководство по программированию

Страница: 82 / 162

Asterion DC Multioutput Series
Programming Manual
M330517-01 Rev C 10-65
implemented by the Asterion DC Multioutput Series power supplies are classified as
SCPI approved commands (approved by the SCPI Consortium but not contained in the
SCPI version to which the Asterion DC power supplies conform).
To document whether the syntax of each command is SCPI compliant or not, this manual
provides a column, labeled “SCPI”, in each command reference table. A “C” in the “SCPI”
column means that the command syntax is SCPI compliant; an “N” in the “SCPI” column
means that the command syntax is not part of the SCPI definition.
10.3.1
Parameter Definitions
The following table describes the format of the command arguments, when applicable.
PARAMETER DEFINITIONS
Type Valid Arguments
<boolean>
“ON” or 1. “OFF” or 0.
<NR1>
The data format <NR1> is defined in IEEE 488.2 for integers.
Zero, positive and negative integer numeric values are valid data.
<NRf>
The data format <NRf> is defined in IEEE 488.2 for flexible Numeric
Representation. Zero, positive and negative floating-point numeric
values are some examples of valid data.
<n>
The data format <n> represents channel number. 1, 2 and 3 are the valid
data. “1” represents channel 1, “2” represents channel 2 and “3”
represents channel 3.
<string> Characters enclosed by single or double quotes.
10.3.2
Conventions
SCPI uses the conventions where optional commands and parameters are enclosed by
“[ ]”. Additionally, the shorthand version of a command is indicated by capital letters.
For example,
SOURce2:VOLTage[:LEVel][:IMMediate][:AMPLitude]
120.0
can be written as
SOURce2:VOLTage
120.0
or
SOUR2:VOLT
120.0
10.3.3
Queries
The query syntax is identical
to the command syntax with a “?” appended. For example,
to query the programmed voltage, send the string:
SOURce<n>:VOLTage?.
A