Ametek 76004567, Оригинальная инструкция по эксплуатации

Страница: 43 / 71

Maintenance
SPECTRO ARCOS FHX3X — 08.02.2022 — 43
7. Clean the components of the
plasma torch.

Place the torch (3) in aqua
regia (a mixture of one part
concentrated nitric acid and
three parts concentrated
hydrochloric acid).

Hazardous substance!
Observe the
corresponding
information on
hazardous materials.

Let the acid/cleaning
solution act for approx. 15
minutes.

Subsequently, rinse the
torch with distilled water and
let it dry completely.
Fig. 15
8. Use a lint-free cloth in order to clean the adapter; subsequently, proceed with
a visual inspection.
9. Re-mount the plasma torch.

The same steps—carried out in reverse order—are used for mounting
the plasma torch, see point 5

Push the torch (1) into the
adapter (2) until the plasma
gas connection is concentric
with the recess in the
adapter (3).

There is a clearance of
±1 mm to optimize the
torch’s height.

Reconnect the hoses (A =
Axillary, C = Plasma gas).
Fig. 16