Amerex 20150, Руководство по проектированию, установке, техническому обслуживанию и перезарядке

Страница: 58 / 171

GRIDDLE PROTECTION - LARGE
TWO (2) FLOW POINT NOZZLE (P/N 14178)
GRIDDLE PROTECTION - LOW PROXIMITY
TWO (2) FLOW POINT NOZZLE (P/N 14178)
December 2008 Section 3 KP Design Page 3 – 15
Amerex Restaurant Fire Suppression System (EX 4658)
The Amerex Range Nozzle (P/N: 14178) has two (2)
flow points and will protect a griddle surface of 48
inches wide (122 cm) x 30 inches deep (76 cm). The
nozzle must be located along the perimeter of the
appliance and within a vertical height range from 24"
(61 cm) to 50" (127 cm) above the surface of the
appliance. The aiming point for the nozzle is the
"Point of Intersection
"
of a straight line from the
nozzle location to the center of the appliance, where
the line crosses the outer edge of an 11 inch square
(28 cm sq.), centered over the center point of the
griddle.
The Amerex Range Nozzle (P/N: 14178) has two (2) flow points and
will protect a griddle surface of 48 inches wide (122 cm) x 30 inches
deep (76 cm). The nozzle must be located at any one of the
four
corners of the appliance and within a vertical height range from 15"
(38 cm) to 24" (61 cm) above the surface of the appliance. The
aiming point for the nozzle is the
"Point of Intersection"
of a
straight line from the nozzle location to the center of the appliance,
where the line crosses the outer edge of an 11 inch square (28 cm
sq.), centered over the center point of the griddle.
11" square centered
on griddle's
center
Note: maximum & minimum
heights must be measured
from the tip of nozzle
to the
surface of the appliance.
Note: Maximum & minimum
heights must be measured from
the tip of nozzle
to the surface
of the appliance.
50"
24"
24"
11" square centered on
module center
15"