Amerex 20150, Руководство по проектированию, установке, техническому обслуживанию и перезарядке

Страница: 40 / 171

KITCHEN HOOD FASTENER
Amerex is pleased to offer two methods of fastening hardware to the underside of the hood without
having access to the top of the hood. Simply drill a 25/64” Dia. hole and install the listed fastener,
for use with stainless steel hood material 0.027” to 0.165” thick.
RIVET TYPE STUD (P/N 20535)
The rivet type stud is a ¼ - 20UN – 2A threaded
stud with approximately 3/4” of length. This device
may be used for mounting detector brackets,
conduit fasteners, PRM clips, pipe hangers, etc.
Attach devices to the stud using a standard ¼-
20UN nut and lock washer. Rivet studs come 10
to a bag.
RIVET TYPE NUT (P/N 20536
)
The rivet type nut is tapped ¼ - 20UN – 2B with
approximately 3/4” of length. This device may be
used for mounting detector brackets, conduit
fasteners, PRM clips, pipe hangers, etc. Attach
devices to the tapped blind rivet using a standard
¼-20UN bolt or screw and lock washer. Rivet
nuts come 10 to a bag.
RIVET INSTALLATION TOOL SET
(P/N 20552)
The Rivet Installation Tool Set Comes
complete with mandrel and nosepiece for
installing both studs and nuts. Instructions
on set up and use of the tool are contained
in the box with each tool.
January 2012 Section 2 System Components Page 2 – 16
Amerex Restaurant Fire Suppression System (EX 4658)
INSTALLED
INSTALLED