Amerex 20150, Руководство по проектированию, установке, техническому обслуживанию и перезарядке

Страница: 163 / 171

Page 4 of 7 Pages
KP SYSTEMS AGENT
Section 7. Handling and storage
Avoid skin, eye, or respiratory exposure. Use appropriate PPE when handling or
maintaining equipment, and wash thoroughly after handling (see Section 8). Keep
product in original container or extinguisher. Contents may be under pressure –
inspect for extinguisher rust periodically to insure container integrity. Do not mix with
other extinguishing agents.
Section 8. Exposure controls/ personal protection
During the application of this product against fires, exhaust gases and the products of
incomplete combustion (PICs) are the principal respiratory hazards. In the
manufacture of extinguishers, automated systems and point source ventilation controls
sufficiently minimize respiratory exposure. Employers and employees must use their
collective judgment in determining occupational settings where the use of a respirator
is prudent. The need for respiratory protection is not likely for short-term use in well
ventilated areas.
Respiratory protection: use air-purifying respirator (APR) or powered air-purifying
respirator (PAPR) with organic vapor cartridges/canisters for short term exposure, and
supplied air/SCBA for high concentration or prolonged exposure.
Eye protection: wear chemical goggles.
Skin protection: use nitrile, latex, or similar gloves and coveralls. Good personal
hygiene practices essential, such as avoiding food, tobacco products, or other hand-to-
mouth contact when handling. Wash thoroughly after handling.
Section 9. Physical and chemical properties
Appearance: reddish colored liquid
Specific gravity: ~ 1.3
Solubility: soluble in water
Non –flammable
Flash point: none
Vapor pressure: < 10 mm Hg at room temperature
pH: approximately 8.5