Amerex 20150, Руководство по проектированию, установке, техническому обслуживанию и перезарядке

Страница: 33 / 171

May 2012 Section 2 System Components Page 2 – 10
Amerex Restaurant Fire Suppression System (EX 4658)
MANUAL PULL STATION (P/N 11993)
Every Amerex Kitchen Fire Suppression System must use
at least one Manual Pull Station. This device provides a
means of discharging the system manually. Manual Pull
Stations should be located in a PATH OF EGRESS and
mounted at a height conforming to the local code
requirements. The Manual Pull Station may be recessed
or surface mounted, see “Installation”, Section 4, Page 11
for details.
MANUAL PULL STATION ADAPTER KIT (P/N 14193)
(for use with manual pull station P/N 11993)
When recessing the manual pull station the adapter
kit compensates for the additional wall thickness and
provides an oversized cover for the wall opening.
MANUAL PULL STATIONS (OVERSIZED - P/N 14320)
This Manual Pull Station is to be recess mounted. The
oversized cover is large enough to cover sheetrock access
hole for the standard 4” octagonal box and remain
attractive and functional. Manual Pull Stations should be
located in the
path of egress and mounted at a height
conforming to the local Authority Having Jurisdiction.
MANUAL PULL STATION (COMBO PACK)
(ENG. – P/N 21481)
(ENG. / FRENCH – P/N 22117)
(ENG. / SPANISH – P/N 22116)
This Manual Pull Station may be either surface or recess
mounted. The oversized cover is large enough to cover the
sheetrock access hole for the standard 4” octagonal box and
remain attractive and functional. Manual Pull Stations should
be located in the
path of egress and mounted at a height
conforming to the local code requirements.
“QUICK-SEAL” ADAPTER
(3/8” pipe – P/N 12276 – HOLE SIZE 1 1/8” DIA.)
(1/2” pipe – P/N 14204 – HOLE SIZE 1 1/8” DIA.)
( 1” pipe – P/N 18252 – HOLE SIZE 1 5/8” DIA.)
This listed mechanical bulkhead fitting produces a liquid tight
seal around distribution piping where the piping penetrates
hoods or ducts. The “quick-seal” adapter is available in 3/8” and 1/2”
NPT.
“COMPRESSION SEAL” ADAPTER
(3/8” pipe – P/N 12510 – HOLE SIZE 1 1/8” DIA.)
(1/2” EMT – P/N 12512 – HOLE SIZE 1 1/8” DIA.)
The compression seal adapter is a “listed mechanical bulkhead” fitting
that produces a liquid tight seal around pipe or conduit when making
penetrations in a hood or duct. Unlike the quick-seal adapter, the
compression seal adapter is not threaded to accept pipe and does not
require conduit or pipe to be cut or threaded. It is available in 3/8” and
1/2” sizes.
3 5/8"
(9.65 cm)
ADAPTER BODY
GASKET SEAL
LOCK WASHER
NUT
2 ¼”
(24.13 cm)
3/8 PIPE
3 5/8"
(9.65 cm)