AMD ElanSC310 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 124

AMD ElanSC310 Скачать руководство пользователя страница 2

ÉlanSC310 Microcontroller Evaluation Board, Revision 1.0

© 1996 by Advanced Micro Devices, Inc.
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any
form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written
permission of Advanced Micro Devices, Inc.

Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subdivision (b)(3)(ii) of the
Rights in Technical Data and Computer Software clause at 252.227-7013. Advanced Micro Devices, Inc., 5204 E. Ben
White Blvd., Austin, TX 78741.

AMD is a registered trademark, and Élan is a trademark of Advanced Micro Devices, Inc.
Other product or brand names are used solely for identification and may be the trademarks or registered trademarks of
their respective companies.

The text pages of this document have been printed on recycled paper consisting of 50% recycled fiber and 50%
virgin fiber; the post-consumer waste content is 10%. These pages are recyclable.

Advanced Micro Devices, Inc.
5204 E. Ben White Blvd.
Austin, TX 78741-7399

evalbd.book : frt Page 2 Thursday, August 8, 1996 2:34 PM

«
1
2
3
4
...
»

Содержание ElanSC310





























































































































Отзывы:

Нет отзывов