C613-50057-01 REV A
Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
1571
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
D
YNAMIC
H
OST
C
ONFIGURATION
P
ROTOCOL
(DHCP) C
OMMANDS
NETWORK
(DHCP)
network (DHCP)
Overview
This command sets the network (subnet) that the DHCP address pool applies to.
The
no
variant of this command removes the network (subnet) from the DHCP
address pool.
Syntax
network
{
<ip-subnet-address/prefix-length>
|
<ip-subnet-address/mask>
}
no network
Mode
DHCP Configuration
Usage
This command will fail if it would make existing ranges invalid. For example, if they
do not lie within the new network you are configuring.
The
no
variant of this command will fail if ranges still exist in the pool. You must
remove all ranges in the pool before issuing a
no network
command to remove a
network from the pool.
Examples
To configure a network for the address pool
P2
, where the subnet is
192.0.2.5
and the mask is
255.255.255.0
, use the commands:
awplus#
configure terminal
awplus(config)#
ip dhcp pool P2
awplus(dhcp-config)#
network 192.0.2.5/24
or you can use dotted decimal notation instead of slash notation for the
subnet-mask:
awplus#
configure terminal
awplus(config)#
ip dhcp pool P2
awplus(dhcp-config)#
network 192.0.2.5 255.255.255.0
Related
Commands
service dhcp-server
subnet-mask
Parameter
Description
<ip-subnet-address/
prefix-length>
The IPv4 subnet address in dotted decimal notation
followed by the prefix length in slash notation.
<ip-subnet-address/
mask>
The IPv4 subnet address in dotted decimal notation
followed by the subnet mask in dotted decimal
notation.
