Allied Telesis AT-IX5-28GPX, Руководство пользователя

Страница: 1906 / 1928

C613-50057-01 REV A Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch 1877
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
S
TACKING
C
OMMANDS
SHOW STACK
Table 49-5: Parameters in the output from the show stack detail command
Parameter Description
S/W version auto
synchronization
Whether the software-auto-synchronization feature is
turned on or off.
Host name
The host name of the stack member.
ID
Stack-ID.
Last Role Change
The date and time the stack member last changed its role in
the stack.
MAC address
Stack member MAC address.
Management VLAN
ID
The VLAN ID currently used for stack management: the
default is 4094.
Management VLAN
subnet address
The current stacking management VLAN subnet address.
Virtual Chassis
ID
The Virtual Chassis ID determines the last 12 bits of the
Virtual MAC address:
0000.cd37.0xxx
Virtual MAC
Address
The Virtual MAC address of the stack.
Disabled Master
Monitoring
The current Disabled Master Monitoring status. This can be:
• Enabled
• Disabled
• Inactive
Operational
Status
The status of the stack. This can be:
• Normal operation :
If any other status is displayed, it may warrant further
investigation.
• Stacking hardware disabled:
Use the stack enable command to activate the stacking
feature.
• Operating in failover mode :
This stack member has become separated from the rest of
the stack, or it failed to join the stack correctly.
• Standalone unit :
Stacking is enabled, but no other stack members are present.
• Not all stack ports are up :
One or more stacking ports may be down, or stacking
discovery may not have detected the neighbor successfully.
Stack Status
The stack’s overall status. Note that a warning is issued if the
stack is not connected in a standard ring topology.