Allied Telesis AT-IX5-28GPX, Руководство пользователя

Страница: 1911 / 1928

1882 Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch C613-50057-01 REV A
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
S
TACKING
C
OMMANDS
STACK DISABLED
-
MASTER
-
MONITORING
stack disabled-master-monitoring
Overview This command enables the Disabled Master Monitoring (DMM) feature. If a stack
member becomes a disabled master, the DMM feature will use the stack resiliency
link to continue monitoring the health of the separated stack master.
Use the no variant of this command to disable the DMM feature.
Syntax
stack disabled-master-monitoring
no stack disabled-master-monitoring
Default By default, Disabled Master Monitoring is enabled. However, it only operates if
there is a resiliency link.
Mode Global Configuration
Usage This command enables additional stack resiliency link functionality, which is used
if a stack separation occurs. For DMM to operate, a resiliency link must also be
configured (
stack resiliencylink command). A stack separation could result in a
stack member becoming a disabled master, which has the configuration as a
normal stack master except that all its switchports are shutdown.
For more information about the disabled master state, see the VCStack Feature
Overview and Configuration Guide .
When the DMM feature is enabled, the disabled master will continue to monitor
the health of the original stack master over the stack resiliency link connection. If
the original stack master were to fail, when the DMM feature is enabled, then the
disabled master will detect this and will automatically re-enable its switchports.
This ensures that the stack will continue to pass network traffic, even if a
catastrophic stack failure occurs.
For more information about the DMM feature when the stack member is a disabled
master, see the
VCStack Feature Overview and Configuration Guide .
Examples To enable the DMM feature, use the following commands:
awplus# configure terminal
awplus(config)# stack disabled-master-monitoring
To disable the DMM feature, use the following commands:
awplus# configure terminal
awplus(config)# no stack disabled-master-monitoring
Related
Commands
switch provision (stack)
show stack
stack resiliencylink
type stack disabled-master
type stack master-fail