Allied Telesis AT-IX5-28GPX, Руководство пользователя

Страница: 1049 / 1928

1032 Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch C613-50057-01 REV A
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
802.1X C
OMMANDS
SHOW DOT
1
X SUPPLICANT INTERFACE
show dot1x supplicant interface
Overview This command shows the supplicant state of the authentication mode set for the
interface, which may be a static channel (or static aggregator) or a dynamic (or
LACP) channel group or a switch port.
This command shows a summary when the optional brief parameter is used.
For information on filtering and saving command output, see “Controlling “show”
Command Output” in the
“Getting Started with AlliedWare Plus” Feature Overview
and Configuration Guide .
Syntax
show dot1x supplicant interface < interface-list > [brief]
Mode Privileged Exec
Parameter Description
<interface-list>
The interfaces or ports to configure. An interface-list can be:
• an interface (e.g.
vlan2
), a switch port (e.g.
port1.0.6
),
a static channel group (e.g.
sa2
) or a dynamic (LACP)
channel group (e.g.
po2
)
• a continuous range of interfaces, ports, static channel
groups or dynamic (LACP) channel groups separated by a
hyphen; e.g.
vlan2-8
, or
port1.0.1-1.0.4
, or
sa1-2
, or
po1-2
• a comma-separated list of the above; e.g.
port1.0.1,port1.0.4-1.0.6
. Do not mix interface
types in a list
The specified interfaces must exist.
brief
Brief summary of the Supplicant state.