1348
Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
C613-50057-01 REV A
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
VRRP C
OMMANDS
PRIORITY
priority
Overview
Use this command to configure the VRRP router priority within the virtual router.
The highest priority router is Master (unless
preempt-mode
is false).
Use the
no
variant of this command to remove the VRRP router priority within the
virtual router, which has been set using the
priority
command.
Syntax
priority <
1-255
>
no priority
Default
Defaults for priority are:
master router
= 255;
backup
= 100.
Mode
Router Configuration
Usage
Priority determines the role that each VRRP router plays and what happens if the
master virtual router fails. If a VRRP router owns the IP address of the virtual router
and the IP address of the interface, then this VRRP router functions as the master
virtual router.
Priority also determines whether a VRRP router functions as a backup virtual router
and the order of ascendancy to becoming a master virtual router if the master
virtual router fails. Configure the priority of each backup virtual router with a a
value of 1 through 254.
See the
VRRP Feature Overview and Configuration Guide
for more information
about VRRPv3 IPv4 and IPv6 configuration details.
Examples
The example below shows you how to configure 101 as the priority for VRRP VR ID
5 on vlan2:
awplus#
configure terminal
awplus(config)#
router vrrp 5 vlan2
awplus(config-router)#
priority 101
The example below shows you how to remove the priority configured for VRRP VR
ID 5 on vlan2:
awplus#
configure terminal
awplus(config)#
router vrrp 5 vlan2
awplus(config-router)#
no priority
Parameter
Description
<
1-255
>
The priority. For the master router, use 255 for this parameter;
otherwise use any number from the range <1-254>.
