C613-50057-01 REV A
Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
399
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
S
WITCHING
C
OMMANDS
SHOW
PORT
-
SECURITY
INTERFACE
show port-security interface
Overview
Use this command to show the current port-security configuration and the switch
port status.
Syntax
show port-security interface <
port>
Mode
Privileged Exec
Example
To see the port-security status on
port1.0.1
, use the following command:
awplus#
show port-security interface port1.0.1
Output
Figure 10-14: Example output from the
show port-security interface
command
Parameter
Description
<port>
The port to display information about. The port may be a switch
port (e.g.
port1.0.4
), a static channel group (e.g.
sa3
), or a
dynamic (LACP) channel group (e.g.
po4
).
Port Security configuration
Security Enabled : YES
Port Status : ENABLED
Violation Mode : TRAP
Aging : OFF
Maximum MAC Addresses : 3
Total MAC ddresses : 1
Lock Status : UNLOCKED
Security Violation Count : 0
Last Violation Source Address : None
