232
Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
C613-50057-01 REV A
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
S
YSTEM
C
ONFIGURATION
AND
M
ONITORING
C
OMMANDS
SHOW
INTERFACE
MEMORY
show interface memory
Overview
This command displays the shared memory used by either all interfaces, or the
specified interface or interfaces. The output is useful for diagnostic purposes by
Allied Telesis authorized service personnel.
For information on filtering and saving command output, see “Controlling “show”
Command Output” in the
“Getting Started with AlliedWare Plus” Feature Overview
and Configuration Guide
.
Syntax
show interface memory
show interface <
port-list
> memory
Mode
User Exec and Privileged Exec
Example
To display the shared memory used by all interfaces, use the command:
awplus#
show interface memory
To display the shared memory used by port1.0.1 and port1.0.5 to port1.0.6, use the
command:
awplus#
show interface port1.0.1,port1.0.5-1.0.6 memory
Output
Figure 5-7:
Example output from the
show interface <port-list> memory
command
Parameter
Description
<port-list>
The ports to display information about. The port list can be:
•
a switch port (e.g.
port1.0.4
) a static channel group (e.g.
sa2
)
or a dynamic (LACP) channel group (e.g.
po2
)
•
a continuous range of ports separated by a hyphen, e.g.
port1.0.1-1.0.4
, or
sa1-2
, or
po1-2
•
a comma-separated list of ports and port ranges, e.g.
port1.0.1,port1.0.4-1.0.6
. Do not mix switch ports,
static channel groups, and dynamic (LACP) channel groups in the
same list
awplus#show interface port1.0.1,port1.0.5-1.0.6 memory
Vlan blocking state shared memory usage
---------------------------------------------
Interface shmid Bytes Used nattch Status
port1.0.1 393228 512 1
port1.0.5 491535 512 1
port1.0.6 557073 512 1
