C613-50057-01 REV A
Command Reference for AT-IX5-28GPX High Availability, High Power Video Surveillance PoE Switch
1737
AlliedWare Plus™ Operating System - Version 5.4.5-0.x
LLDP C
OMMANDS
SHOW
LLDP
NEIGHBORS
show lldp neighbors
Overview
This command displays a summary of information received from neighbors via
specified ports. If no port list is supplied, neighbor information for all ports is
displayed.
Syntax
show lldp neighbors [interface <
port-list
>]
Mode
User Exec and Privileged Exec
Examples
To display neighbor information received via all ports, use the command:
awplus#
show lldp neighbors
To display neighbor information received via ports 1.0.1 and 1.0.6 with LLDP-MED
configuration, use the command:
awplus#
show lldp neighbors interface port1.0.1,port1.0.6
Output
Figure 42-4:
Example output from the
show lldp neighbors
command
Parameter
Description
<
port-list
>
The ports for which the neighbor information is to be shown.
LLDP Neighbor Information:
Total number of neighbors on these ports .... 4
System Capability Codes:
O = Other P = Repeater B = Bridge W = WLAN Access Point
R = Router T = Telephone C = DOCSIS Cable Device S = Station Only
LLDP-MED Device Type and Power Source Codes:
1 = Class I 3 = Class III PSE = PoE Both = PoE&Local Prim = Primary
2 = Class II N = Network Con. Locl = Local Unkn = Unknown Back = Backup
Local Neighbor Neighbor Neighbor System MED
Port Chassis ID Port ID Sys Name Cap. Ty Pwr
----------------------------------------------------------------------------------
1.0.1 002d.3044.7ba6 port1.0.2 awplus OPBWRTCS
1.0.1 0011.3109.e5c6 port1.0.3 AT-9924 switch/route... --B-R---
1.0.6 0000.10cf.8590 port3 AR-442S --B-R---
1.0.6 00ee.4352.df51 192.168.1.2 Jim’s desk phone --B--T-- 3 PSE
Table 42-6: Parameters in the output of the
show lldp neighbors
command
Parameter
Description
Local Port
Local port on which the neighbor information was
received.
Neighbor Chassis ID
Chassis ID that uniquely identifies the neighbor.
