manualshive.com logo in svg

Allice Messtechnik R&S ZND, Руководство пользователя

Поделиться
Скачать
Allice Messtechnik R&S ZND Скачать руководство пользователя страница 99

Concepts and features

R&S

®

ZND

99

User Manual 1173.9557.02 ─ 61

●

"Windows Explorer" opens the selected directory in the Windows Explorer.

●

"File name" specifies a filename to save the current data. The analyzer adds the
extension in the "Files of type" field.

●

"Files of type" filters the displayed files by type.

●

"Open" opens selected file and closes the dialog.

●

"Cancel" closes the dialog without opening a file.

Tip: 

Dialog properties (e.g. the current directory) are remembered when the dialog is

closed. To restore default directories, select "Use Default Directories" in the 

Presets

tab

 of the "System Config" dialog.

Save Dialog

The "Save" dialog is used to store various data types (e.g. cal kit data, limit lines,
sweep segment lists, ...).

Depending on the context, the dialog is displayed with different caption, default direc-
tory ("Traces" in the above screenshot), and file types. Context-specific options (e.g.
"Output Format" in the dialog above) are accessible via controls in the section below
the "Ask Before Overwriting" toggle button.

●

"Look in" specifies the drive and directory in which the data is stored. The icons to
the right of the pull-down list are provided for easy navigation in the file system
(place the cursor on the icons to obtain "Whats this" help).

●

"File name" specifies a filename to save the current data. The analyzer adds the
extension in the "Files of type" field.

●

"Files of type" selects a particular file type for the created file.

●

"Save" saves the data in the selected file and directory and closes the dialog.

●

"Cancel" closes the dialog without saving the data.

●

"Windows Explorer" opens the selected directory in Windows Explorer.

●

If "Ask Before Overwriting" is enabled, overwriting an existing file has to be con-
firmed.

Tip: 

Dialog properties (e.g. the current directory) are remembered when the dialog is

closed. To restore default directories, select "Use Default Directories" in the 

Presets

tab

 of the "System Config" dialog.

4.2.2.3

 

Multi-channel setup dialog

Depending on the desired DUT and measurement type, the measurement channel has
to be prepared in a particular way. The multi-channel setup dialog was invented to
make this task as easy as possible.

Screen elements

www.allice.de

Allice Messtechnik GmbH

Содержание R&S ZND





































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды