GUI reference
R&S
®
ZND
261
User Manual 1173.9557.02 ─ 61
Show as
Selects the physical unit of the displayed trace. It is possible to display the measured
"Voltage" V or convert it to a "Power" according to the formula
P = V
2
/Re(Z
0
).
Z
0
denotes the reference impedance of the source port. The reference impedances are
defined in the "Balanced Ports" dialog (see
Chapter 5.2.1.3, "Balanced Ports dialog"
Remote command:
5.2.10
External DLL tab
The "External DLL" tab allows you to add/remove custom plug-ins to/from the firmware.
It gives access to their configuration, tasks, and traces.
Background information
Refer to
Chapter 4.7.21, "External DLLs"
5.2.10.1
Controls on the External DLL tab
Configuration / Perm. Settings
Opens the
External DLL Configuration Dialog
.
Measurement
The "Measurement" section gives access to the custom traces of the loaded plug-ins.
Each external DLL
<ext_dll_name>.dll
that provides at least one custom trace
type, adds a measurement button "<ext_dll_name>" (with dotted left border) to the
"Measurement" section of the "External DLL" tab. If neither the PAE plugin nor any cus-
tom external DLL is installed, the "Measurement" section is hidden.
Tapping (clicking) or dragging & dropping a measurement button to the diagram area,
opens an additional
As usual, tapping (clicking) redefines the current trace while dragging & dropping cre-
ates a trace.
Meas softtool
www.allice.de
Allice Messtechnik GmbH
