manualshive.com logo in svg

Allice Messtechnik R&S ZND, Руководство пользователя

Поделиться
Скачать
Allice Messtechnik R&S ZND Скачать руководство пользователя страница 391

GUI reference

R&S

®

ZND

391

User Manual 1173.9557.02 ─ 61

The analyzer fimware automatically activates/deactivates ports during/after a (success-
ful) calibration:

●

Calibrated ports that were previously disabled, are automatically enabled as single-
ended logical ports.

●

An uncalibrated port that is not used by a measurement (i.e. the port is not required
by any trace of the related channel) is disabled.

Remote command: 
The port parameters in many calibration commands define the calibrated ports.

Cal Unit

Displays the connected calibration units. The R&S

 

ZND auto-detects all calibration

units which are connected to one of its USB ports. If several cal units are connected,
one of them must be selected for calibration (active cal unit). A warning is displayed if
the current sweep range of the network analyzer exceeds the characterized frequency
range of the calibration unit.

For background information, see 

Chapter 4.5.5, "Automatic calibration"

, 

on page 164.

Remote command: 

SYSTem:COMMunicate:RDEVice:AKAL:ADDRess:ALL?
SYSTem:COMMunicate:RDEVice:AKAL:ADDRess

Characterization

Displays all characterizations that are stored in the active cal unit. The "Factory" char-
acterization is available for all calibration units; it ensures an accurate calibration for all
standard applications. To account for modifications of the cal unit such as the connec-
tion of additional adapters, you can generate modified sets of characterization data
using the cal unit characterization wizard. See 

Chapter 5.11.2.3, "Characterize Cal Unit

dialog"

, 

on page 422. By default, the R&S

 

ZND uses the last generated cal unit charac-

terization.

For an inline calibration system, each connected inline calibration unit has its own set
of characterizations:

Tip:

 If the characterization wizard is password-protected, the "Characterization" button

is unavailable. Use this functionality to prevent inadvertent activation of inappropriate
characterizations. See 

"Authentication"

 

on page 423.

See also 

Chapter 4.5.5.3, "Characterization of calibration units"

, 

on page 167.

Remote command: 

SYSTem:COMMunicate:RDEVice:AKAL:CKIT
SYSTem:COMMunicate:RDEVice:AKAL:CKIT:CATalog?
SYSTem:COMMunicate:RDEVice:AKAL:CKIT:STANdard:CATalog?
SYSTem:COMMunicate:RDEVice:AKAL:SDATa?

Cal softtool

www.allice.de

Allice Messtechnik GmbH

Содержание R&S ZND





































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды