Concepts and features
R&S
®
ZND
192
User Manual 1173.9557.02 ─ 61
parameters, or the entire transformation network can be described by imported 4-port
S-parameters.
The first network is defined by its S-parameters stored in an imported four-port Touch-
stone file (
*.s4p
). No additional parameters are required.
The following networks are composed of a shunt C or L and two serial elements,
described by imported 2-port S-parameters. They are named
Serial 2-port, Shunt C / Serial 2-port, Shunt L /
Shunt L, Serial 2-port / Shunt C, Serial 2-port
.
The following networks are composed of two serial Cs or Ls (as seen from the analyzer
test port), followed by a shunt C or L. They are named
Serial Cs, Shunt L /
Serial Ls, Shunt C / Serial Cs, Shunt C / Serial Ls, Shunt L
.
The following networks are composed of a shunt C or L (as seen from the analyzer test
port), followed by two serial Cs or Ls. They are named
Shunt L, Serial Cs /
Shunt C, Serial Ls / Shunt C, Serial Cs / Shunt L, Serial Ls
.
Offset parameters and de-/embedding
www.allice.de
Allice Messtechnik GmbH
