14
62631
Section 3 Troubleshooting
To reduce the risk of electric shock, fire, explosion, serious injury or death:
• Disconnect electric power to the dryer(s) before servicing.
• Close gas shut-off valve to gas dryer(s) before servicing.
• Never start the dryer(s) with any guards/panels removed.
• Whenever ground wires are removed during servicing, these ground wires must be
reconnected to ensure that the dryer is properly grounded.
W001R1
WARNING
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
14. CLOTHES ARE TOO HOT WHEN REMOVED FROM DRYER
POSSIBLE CAUSE
TO CORRECT
Clothes are removed from dryer before cycle has
completed.
• Allow the dryer to complete the cycle, through the cool-
down to the OFF position.
Inoperative cycling thermostat. Inoperative
thermostat heater on the DELICATE setting.
• Test cycling thermostat or thermostat heater and replace
if inoperative.
Inoperative accumulator or timer (not allowing
cool-down).
• Test accumulator or timer and replace if inoperative.
