Algema BLITZLADER 2, Руководство по эксплуатации

Страница: 91 / 108

Eder GmbH
7.3 Quality notes
The following aspects are not defects:
7 Additional information
Operating Instructions Algema Blitzlader 2 Air - Edition 04/2021 91 / 108
– Humidity
– Light scratches
– Optically modified surfaces
– Pressure points on the railing due to slings
1. Humidity
Because tarpaulin frames, toolboxes and attachments are not thermally insulated,
condensation can form under tarpaulin covers, in toolboxes and in attachments.
Water can enter at openings such as doors, flaps and lids.
2. Light scratches
During the production of our superstructure, EDER GmbH takes care not to scratch
surfaces.
However, since the assembly is a handmade product, slight scratches on surfaces may
occur during assembly. These scratches do not affect the function and are therefore not a
reason for complaint.
3. Optically modified surfaces
Aluminum profiles may differ slightly in color. The discoloration is due to the material and
does not affect the use and safety of the vehicle and is therefore not a reason for complaint.
Aluminum parts are not resistant to certain aggressive chemical substances such as acids.
Road salt in winter or aggressive soiling must be washed off thoroughly with clear
water immediately after the end of the journey.
Due to their material properties, rubber surfaces can shrink slightly over time.