Algema BLITZLADER 2, Руководство по эксплуатации

Страница: 45 / 108

Eder GmbH 4 Operation and running
Emergency stop function:
For safety reasons, the emergency stop function of the Stop/Emergency stop mushroom
pushbutton including the deactivation of all functions is mandatory. The emergency stop
function is activated automatically by pressing the Stop/Emergency stop mushroom button
or if no command is received for approx. five minutes. There are two ways to reset the
setup functions after activating the emergency stop function:
Possibility 1:
Operating Instructions Algema Blitzlader 2 Air - Edition 04/2021 45 / 108
•
• Body functions in the driver's cab deactivated
• Switch off the ignition of the base vehicle.
• Switch on the ignition of the base vehicle.
• Activate body functions in the driver's cab. The hand control panel on the outside left
is active.
If you want to continue working with the radio remote control, activate the radio
remote control either on the touch panel or with the Start button (1).
Possibility 2:
•
•
Body functions in the driver's cab deactivated
Activate body functions in the driver's cab. The hand control panel on the outside left
is active.
•
Briefly actuate a function on the manual control panel at least once.
• If you want to continue working with the radio remote control, activate the radio
remote control either on the touch panel or with the Start button (1).
See also "Tilt plateau operation", page 21.
If the emergency stop function has been activated, the manual control
panel is also no longer active without a reset.